Altech recommends a 4-layer PCB with a dedicated ground plane and thermal vias to dissipate heat. A minimum of 1 oz copper thickness is recommended for the power traces. Additionally, a heat sink or thermal pad can be used to further improve thermal management.
The MV-492 has built-in overvoltage protection (OVP) and undervoltage protection (UVP) circuits. In the event of an overvoltage condition, the device will automatically shut down to prevent damage. For undervoltage conditions, the device will enter a low-power state to prevent malfunction.
The MV-492 can handle surge currents up to 100 A for 1 ms, making it suitable for applications with high inrush currents.
Yes, MV-492 can be used in parallel configuration to increase the overall power rating. However, it is essential to ensure that the devices are properly synchronized and matched to prevent uneven current sharing and potential damage.
The typical response time for the OCP feature in MV-492 is around 1-2 μs, ensuring fast and reliable protection against overcurrent conditions.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MV-492 Overview
Use the download button to access the MV-492 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MV-49,
or try a keyword search, such as Terminals and Terminal Blocks