Part Image

MX25L12835FMI-10G - Macronix

Description: MX25L12835FMI-10G NOR Flash Memory, 128M x 1 bit, 32M x 4 bit, 64M x 2 bit 128Mbit, 2.7 → 3.6 V, 16-Pin, SOP

Download MX25L12835FMI-10G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MX25L12835FMI-10G - Macronix PCB footprint - Small Outline Packages - Small Outline Packages - SOP
click to zoom
3D Models
MX25L12835FMI-10G - Macronix  - 3D model - Small Outline Packages - SOP
click to zoom

MX25L12835FMI-10G Details

  • Manufacturer Part Number:

    MX25L12835FMI-10G

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Factory Lead Time:

    10 Weeks

  • Manufacturer:

    Macronix International Co Ltd

  • YTEOL:

    9

  • Clock Frequency-Max (fCLK):

    104 MHz

  • Data Retention Time-Min:

    20

  • Endurance:

    100000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    10.3 mm

  • Memory Density:

    134217728 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Number of Words:

    16777216 words

  • Number of Words Code:

    16000000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    16MX8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.4

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Programming Voltage:

    3 V

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    2.65 mm

  • Serial Bus Type:

    QSPI

  • Standby Current-Max:

    0.00002 A

  • Supply Current-Max:

    0.025 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Type:

    NOR TYPE

  • Width:

    7.52 mm

  • Write Protection:

    HARDWARE/SOFTWARE

MX25L12835FMI-10G Frequently Asked Questions (FAQs)

  • The MX25L12835FMI-10G has a minimum of 100,000 erase cycles, but the actual number of cycles may vary depending on usage and environmental conditions.
  • The hold pin (HOLD#) should be pulled high during power-up and power-down sequences to prevent unwanted writes or erases. It's recommended to tie the HOLD# pin to VCC through a resistor to ensure it's high during power transitions.
  • The recommended clock frequency for the MX25L12835FMI-10G is up to 104 MHz, but it can operate at frequencies up to 133 MHz with some performance degradation.
  • To enter deep power-down mode, send the DPD command (B9h) followed by the CE# pin being driven low. The device will enter a low-power state, and the CE# pin must be driven high to exit DPD mode.
  • The WP# pin is a write-protect pin that prevents accidental writes or erases. It should be tied to VCC or VSS depending on the desired protection level. When WP# is low, the entire memory array is write-protected.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MX25L12835FMI-10G Overview

Use the download button to access the MX25L12835FMI-10G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MX25L, or try a keyword search, such as Flash Memories

Parts related to MX25L12835FMI-10G

Showing 0 results