Description:Built-in 700V MOSFET with Typical RdsON of 11 or 22 Ohms; Large Creepage Distance between High-Voltage Pins; Current- Mode Fixed Frequency Operation: 65kHz - 100kHz - 130kHz ; Skip-Cycle Operation at Low Peak Currents Only: No Acoustic Noise!; Dynamic Self-Supply, No Need of an Auxiliary Winding; Internal 1ms Soft-Start; Auto-Recovery Internal Output Short-Circuit Protection; Latched Overvoltage Protection with Auxiliary Winding Operation; Frequency Jittering for better EMI Signature; Below 100 mW Standby P
A good PCB layout for optimal thermal performance involves placing the device near a thermal pad or a heat sink, and ensuring good thermal conductivity between the device and the heat sink. A 2-layer or 4-layer PCB with a solid ground plane is recommended. Avoid placing thermal vias under the device, and ensure that the thermal pad is connected to a solid ground plane.
To ensure reliable start-up of the converter, ensure that the input voltage is within the recommended range, and that the output capacitor is properly sized. Also, ensure that the feedback network is properly designed and that the compensation components are correctly selected. A soft-start circuit can also be added to reduce inrush current and ensure reliable start-up.
The maximum allowed input voltage ripple for the NCP1014ST65T3G is 10% of the nominal input voltage. Exceeding this limit may affect the converter's performance and reliability.
While it is possible to use a different inductor value, it is not recommended. The recommended inductor value is carefully selected to ensure optimal performance and efficiency. Using a different value may affect the converter's performance, efficiency, and stability.
To troubleshoot oscillations or instability in the converter, check the PCB layout, component values, and feedback network design. Ensure that the output capacitor is properly sized and that the compensation components are correctly selected. Also, check for any signs of overheating, and ensure that the input voltage is within the recommended range.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NCP1014ST65T3G Overview
Use the download button to access the NCP1014ST65T3G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP10,
or try a keyword search, such as Switching Regulator or Controllers
