Description:Low Dropout: 135 mV Typical at 300 mA; High PSRR 75dB at 1kHz; Thermal Shutdown and Current Limit Protections; Very Low Quiescent Current of Typ. 50 µ?A; Available in uDFN 1.0 x 1.0 mm Package; +/- 1% typical Vout Accuracy ; Operating Input Voltage Range: 1.7 V to 5.5 V
A good PCB layout for optimal thermal performance would be to have a solid ground plane on the bottom layer, and to use thermal vias to connect the exposed pad to the ground plane. This helps to dissipate heat efficiently.
To ensure reliable start-up in a noisy environment, it's recommended to add a soft-start circuit to limit the inrush current and to use a high-quality input capacitor to filter out noise. Additionally, consider adding a voltage supervisor to monitor the output voltage and reset the converter if it's not within the desired range.
The maximum allowed capacitance for the output capacitor depends on the specific application and the desired output voltage ripple. As a general rule, it's recommended to keep the output capacitance below 100uF to avoid stability issues. However, it's always best to consult with the datasheet and application notes for specific guidance.
The maximum output current capability of the converter can be calculated by considering the maximum input voltage, the output voltage, and the efficiency of the converter. A good rule of thumb is to assume an efficiency of around 90% and to calculate the maximum output current based on the maximum input power rating of the converter.
The recommended input and output capacitors for the NCP114AMX330TBG depend on the specific application and the desired performance. However, as a general guideline, it's recommended to use low-ESR capacitors with a voltage rating of at least 1.5 times the maximum input voltage. For the output capacitor, a ceramic or polymer capacitor with a capacitance value between 10uF to 47uF is typically suitable.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NCP114AMX330TBG Overview
Use the download button to access the NCP114AMX330TBG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP11,
or try a keyword search, such as Linear Regulator ICs
Suggested Parts
If you searched for NCP114AMX330TBG, you might also be interested in these parts:
