Part Image

NCP114ASN330T2G - onsemi

Description: Low Dropout: 135 mV Typical at 300 mA; High PSRR 75dB at 1kHz; Thermal Shutdown and Current Limit Protections; Very Low Quiescent Current of Typ. 50 µ?A; Available in uDFN 1.0 x 1.0 mm Package; +/- 1% typical Vout Accuracy ; Operating Input Voltage Range: 1.7 V to 5.5 V

Download NCP114ASN330T2G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
NCP114ASN330T2G - onsemi PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - TSOP−5 3.00x1.50x0.95, 0.95P CASE 483 ISSUE P
click to zoom
3D Models
NCP114ASN330T2G - onsemi  - 3D model - SOT23 (5-Pin) - TSOP−5 3.00x1.50x0.95, 0.95P CASE 483 ISSUE P
click to zoom

NCP114ASN330T2G Details

  • Manufacturer Part Number:

    NCP114ASN330T2G

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSOP-5 / SOT-23-5

  • Manufacturer Package Code:

    483

  • Country Of Origin:

    Mainland China

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    onsemi

  • YTEOL:

    7

  • Adjustability:

    FIXED

  • Dropout Voltage1-Max:

    0.225 V

  • Dropout Voltage1-Nom:

    0.15 V

  • Input Voltage Absolute-Max:

    6 V

  • Input Voltage-Max:

    5.5 V

  • Input Voltage-Min:

    3.8 V

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Line Regulation-Max:

    0.00561%

  • Load Regulation-Max:

    0.045%

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    5

  • Operating Temperature TJ-Max:

    85 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Output Current1-Max:

    0.3 A

  • Output Voltage1-Max:

    3.366 V

  • Output Voltage1-Min:

    3.234 V

  • Output Voltage1-Nom:

    3.3 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Seated Height-Max:

    1.1 mm

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Voltage Tolerance-Max:

    2%

  • Width:

    1.5 mm

NCP114ASN330T2G Frequently Asked Questions (FAQs)

  • A good PCB layout for the NCP114ASN330T2G should include a solid ground plane, wide power traces, and a thermal relief pattern on the pads to ensure good heat dissipation. A 2-3 layer board with a thermal via under the IC is also recommended.
  • To ensure proper biasing, make sure to follow the recommended voltage and current ratings in the datasheet. Also, ensure that the input voltage is within the specified range, and the output voltage is properly regulated using a suitable feedback network.
  • To minimize EMI and noise, use a pi-filter (L-C-L) or a common-mode choke at the input, and consider adding a ferrite bead or a common-mode filter at the output. Also, ensure good PCB layout practices, such as separating analog and digital grounds, and using a shielded enclosure if necessary.
  • The NCP114ASN330T2G has built-in overcurrent protection, but you can also add external circuitry to detect faults and overcurrent conditions. Consider using a current sense resistor and a comparator to detect overcurrent conditions, and implement a suitable fault response mechanism.
  • The NCP114ASN330T2G has a high power density, so thermal management is crucial. Ensure good airflow, use a heat sink if necessary, and consider using thermal interface materials to improve heat transfer. Also, follow the recommended operating temperature range and derate the device accordingly.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

NCP114ASN330T2G Overview

Use the download button to access the NCP114ASN330T2G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP11, or try a keyword search, such as Linear Regulator ICs

Parts related to NCP114ASN330T2G

Showing 0 results

NCP114ASN330T2G Alternates

Showing results

Image Part Number Model
Part Image NCP114ASN330T1G onsemi

Fixed Positive LDO Regulator, 3.3V, 0.225V Dropout, CMOS, PDSO5