Description:Operating Input Voltage Range: 1.7 V to 5.5 V; Low Dropout: 250 mV Typical at 300 mA @ 2.8 V; High PSRR 70dB at 1kHz; Thermal Shutdown and Current Limit Protections; Very Low Quiescent Current of Typ. 50 µA; Available in XDFN4 1.0 x 1.0 mm Package; +/- 1% typical Vout Accuracy @25 °C; Available in Fixed Voltage Options: 0.8 V to 3.6 V; Available in TSOP5 Package
A good PCB layout for optimal thermal performance would be to have a solid ground plane on the bottom layer, and to use thermal vias to connect the exposed pad to the ground plane. This helps to dissipate heat efficiently.
To ensure proper biasing, make sure to follow the recommended voltage and current ratings specified in the datasheet. Also, ensure that the input voltage is within the recommended range, and that the output voltage is properly regulated.
Critical components to consider when designing a power supply using the NCP115ASN330T2G include the input and output capacitors, the inductor, and the diode. These components affect the stability, efficiency, and output voltage of the power supply.
To troubleshoot issues with the device, start by checking the input voltage, output voltage, and current ratings. Verify that the device is properly biased and that the PCB layout is correct. Use thermal imaging or temperature measurement tools to identify hotspots. Check for oscillations or instability in the output voltage using an oscilloscope.
Key considerations for EMI and EMC compliance include using a shielded enclosure, minimizing loop areas, and using EMI filters or common-mode chokes to reduce emissions. Ensure that the PCB layout is designed to minimize radiation and that the device is properly decoupled.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NCP115ASN330T2G Overview
Use the download button to access the NCP115ASN330T2G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP11,
or try a keyword search, such as Linear Regulator ICs
Suggested Parts
If you searched for NCP115ASN330T2G, you might also be interested in these parts:
