Description:Very Low Dropout 80mV at 250mA; Ultra High PSRR 98dB at 1kHz, 48dB at 100kHz; Ultra Low Output Noise 10 µVRMS; Operating Input Voltage Range 1.9V to 5.5V; Available in CSP4 0.35P and XDFN4 0.65P packages; Ultra Low Quiescent current 18 µA
A good PCB layout for the NCP160AMX330TBG should prioritize thermal dissipation. Place the device near a thermal pad or a heat sink, and ensure good copper pour coverage around the device. Avoid routing high-current traces under the device, and keep the thermal pad connected to a solid ground plane.
To ensure reliable start-up and shutdown, ensure that the input voltage rises and falls monotonically, and that the enable pin (EN) is properly driven. A soft-start circuit can also be implemented to reduce inrush current and ensure a smooth start-up.
When selecting the output inductor and capacitors, consider the desired output voltage ripple, inductor core loss, and capacitor ESR. Choose an inductor with a high saturation current and low DCR, and capacitors with low ESR and high ripple current ratings.
To optimize the compensation network, use a combination of resistors and capacitors to create a stable and fast transient response. The compensation network should be designed to provide a phase margin of at least 45° and a gain margin of at least 10 dB.
To minimize EMI and noise, use a combination of common-mode chokes, differential-mode inductors, and capacitors to filter the input and output lines. Ensure that the layout is optimized for minimal loop area and that the device is placed away from noise-sensitive components.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NCP160AMX330TBG Overview
Use the download button to access the NCP160AMX330TBG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP16,
or try a keyword search, such as Linear Regulator ICs
