Description:Ultra High PSRR 98dB at 1kHz, 48dB at 100kHz; Ultra Low Output Noise 10 µVRMS; Very Low Dropout 150mV at 450mA; Operating Input Voltage Range 1.9V to 5.5V; Ultra Low Quiescent current 18 µA; Available in CSP4 0.35P and XDFN4 0.65P package; Available in industry standard TSOP5 package
A good PCB layout for optimal thermal performance would be to have a solid ground plane on the bottom layer, and to use thermal vias to connect the exposed pad to the ground plane. This helps to dissipate heat efficiently.
To ensure reliable start-up in a noisy environment, it's recommended to add a soft-start circuit to limit the inrush current and to use a high-quality input capacitor to filter out noise. Additionally, consider adding a voltage supervisor to monitor the output voltage and reset the converter if it falls out of regulation.
The maximum allowed capacitance on the output of the converter is not explicitly stated in the datasheet, but as a general rule of thumb, it's recommended to keep the output capacitance below 10uF to avoid stability issues. However, it's always best to consult with onsemi's application engineers for specific guidance on output capacitance for your particular application.
The NCP161ASN300T1G is rated for operation up to 125°C, but it's essential to consider the derating curves and thermal management when operating in high-temperature environments. Ensure that the device is properly heatsinked, and the PCB is designed to handle the increased temperatures.
To troubleshoot issues with the converter's output voltage regulation, start by checking the input voltage, output voltage, and current. Verify that the output voltage is within the specified range and that the current is within the maximum rating. Check for any signs of overheating, and ensure that the PCB layout is correct. If the issue persists, consult the datasheet and application notes for guidance on troubleshooting and debugging.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NCP161ASN300T1G Overview
Use the download button to access the NCP161ASN300T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP16,
or try a keyword search, such as Linear Regulator ICs
