The recommended PCB layout for optimal thermal performance involves placing the device on a thermal pad with a minimum size of 2x2 mm, using a 2-ounce copper layer, and ensuring good thermal conduction to the surrounding copper areas. Additionally, it's recommended to use vias to connect the thermal pad to the bottom layer of the PCB to improve heat dissipation.
To ensure the device is properly biased, make sure to connect the EN pin to a logic high (VCC) to enable the device, and connect the FB pin to the output voltage divider to set the desired output voltage. Additionally, ensure that the input voltage (VIN) is within the recommended operating range (2.5V to 5.5V) and that the output capacitor (COUT) is properly sized to meet the required output ripple and stability criteria.
When selecting the output capacitor (COUT), consider the following key factors: 1) capacitance value (typically 10uF to 22uF), 2) equivalent series resistance (ESR) should be low (< 100mΩ), 3) voltage rating should be higher than the output voltage, and 4) the capacitor should be able to handle the ripple current. X5R or X7R ceramic capacitors are recommended for their low ESR and high reliability.
The NCP502SN33T1G has a built-in thermal shutdown feature that disables the device when the junction temperature exceeds 150°C. To handle this feature, ensure that the device is properly cooled, and consider adding thermal monitoring and shutdown circuitry to prevent damage to the device or surrounding components. Additionally, ensure that the device is operated within its recommended operating conditions to prevent thermal shutdown.
The NCP502SN33T1G is a high-performance, low-dropout linear regulator with a high output current capability (500mA) and a wide input voltage range (2.5V to 5.5V). Compared to other similar devices from onsemi, the NCP502SN33T1G has a lower dropout voltage (typically 300mV) and a faster line transient response. It's ideal for applications requiring high output current, low noise, and high power supply rejection ratio (PSRR).
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NCP502SN33T1G Overview
Use the download button to access the NCP502SN33T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP50,
or try a keyword search, such as Linear Regulator ICs
