Description:Single Chip Boost-Buck Solution; Two Independent LED Strings Up to 60 V; High Overall Efficiency; Minimum of External Components; Active Input Filter with Low Current Ripple from Battery; Integrated Switched Mode Buck Current Regulator; Two Integrated Buck Switches with 1.4 A Peak Current Capability; Integrated Boost Controller; Programmable Input Current Limitation; Average Current Regulation Through the LEDs; High Operating Switching Frequencies to Reduce Inductor Sizes; Integrated PWM Dimming with Wide F
The recommended PCB layout for optimal thermal performance involves placing thermal vias under the device, using a solid ground plane, and keeping the thermal traces as short and wide as possible. A 4-layer PCB with a dedicated thermal layer is also recommended.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended thermal design guidelines, use a suitable thermal interface material, and consider derating the device's power dissipation according to the ambient temperature.
Using a lower input voltage than the recommended 12V may result in reduced output voltage and current, while using a higher input voltage may increase power dissipation and reduce the device's lifespan. It's essential to consult the datasheet and application notes for specific guidance.
To troubleshoot issues with the OCP feature, check the input voltage, output current, and sense resistor values. Ensure that the sense resistor is correctly connected and that the OCP threshold is set correctly. Also, verify that the device is not overheating, which can trigger the OCP.
To minimize EMI and EMC issues, follow proper PCB layout and design guidelines, use a suitable EMI filter, and ensure that the device is properly shielded. Additionally, consider using a spread-spectrum clock generator to reduce EMI emissions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NCV78663DQ0G Overview
Use the download button to access the NCV78663DQ0G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NCV78,
or try a keyword search, such as Display Drivers
