Please enter a minimum 3 letters or numbers
Technical Content
Part Image

NCV8114ASN150T1G - onsemi

Description: LDO Regulator, 300 mA (Automotive) 1.5V AD

Download NCV8114ASN150T1G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
NCV8114ASN150T1G - onsemi - PCB symbol
click to zoom
PCB Footprints
NCV8114ASN150T1G - onsemi PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - TSOP-5 Case 483 Issue M
click to zoom
3D Models
NCV8114ASN150T1G - onsemi - 3D model - SOT23 (5-Pin) - TSOP-5 Case 483 Issue M
click to zoom

NCV8114ASN150T1G Details

  • Manufacturer Part Number:

    NCV8114ASN150T1G

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Manufacturer Package Code:

    483

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    2 Days

  • Date Of Intro:

    2016-12-14

  • Manufacturer:

    onsemi

  • YTEOL:

    0

  • Adjustability:

    FIXED

  • Dropout Voltage1-Max:

    0.5 V

  • Dropout Voltage1-Nom:

    0.38 V

  • Input Voltage Absolute-Max:

    6 V

  • Input Voltage-Max:

    5.5 V

  • Input Voltage-Min:

    2 V

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Line Regulation-Max:

    0.0053%

  • Load Regulation-Max:

    0.045%

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    5

  • Operating Temperature TJ-Max:

    125 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Output Current1-Max:

    0.3 A

  • Output Voltage1-Max:

    1.55 V

  • Output Voltage1-Min:

    1.46 V

  • Output Voltage1-Nom:

    1.5 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.1 mm

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Voltage Tolerance-Max:

    2.7%

  • Width:

    1.5 mm

NCV8114ASN150T1G Frequently Asked Questions (FAQs)

  • The recommended PCB layout for optimal thermal performance involves placing the device on a thermal pad with a minimum size of 2.5 mm x 2.5 mm, and connecting it to a large copper area on the PCB to dissipate heat efficiently. Additionally, it is recommended to keep the thermal pad away from other components and to use thermal vias to connect the thermal pad to the bottom layer of the PCB.
  • To ensure the device is properly biased during startup, it is recommended to use a soft-start circuit to slowly ramp up the input voltage to the device. This can be achieved using a resistor-capacitor (RC) network or a dedicated soft-start IC. Additionally, it is recommended to use a voltage supervisor or reset IC to ensure the device is held in reset until the input voltage reaches a stable level.
  • The maximum allowed voltage on the EN pin is 6 V. Exceeding this voltage may damage the device. It is recommended to use a voltage divider or a level shifter to ensure the EN pin voltage does not exceed 6 V.
  • The output voltage ripple of the device can be calculated using the following formula: ΔVout = (Iout * Rl) / (fsw * Cout), where ΔVout is the output voltage ripple, Iout is the output current, Rl is the load resistance, fsw is the switching frequency, and Cout is the output capacitance. Additionally, the output voltage ripple can be minimized by using a larger output capacitor and optimizing the PCB layout to reduce parasitic inductance and capacitance.
  • The recommended input capacitor type is a low-ESR ceramic capacitor with a value of 10 μF to 22 μF. The input capacitor should be placed as close as possible to the device's input pins to minimize parasitic inductance and ensure stable operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

NCV8114ASN150T1G Overview

Use the download button to access the NCV8114ASN150T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCV81, or try a keyword search, such as Linear Regulator ICs

Parts related to NCV8114ASN150T1G

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑