Description:Operating Input Voltage Range: 1.7 V to 5.5 V; Low Dropout: 135 mV Typical at 300 mA; High PSRR 75dB at 1kHz; Thermal Shutdown and Current Limit Protections; Very Low Quiescent Current of Typ. 50 µ?A; Available in TSOP5 Package; +/- 1% typical Vout Accuracy
A good PCB layout for optimal thermal performance would be to have a solid ground plane on the bottom layer, and to use thermal vias to connect the exposed pad to the ground plane. This helps to dissipate heat efficiently.
To ensure reliable operation at high temperatures, it's essential to follow the recommended operating conditions, ensure good thermal design, and consider using a heat sink if necessary. Additionally, consider using a thermistor or thermocouple to monitor the temperature and take corrective action if it exceeds the recommended limit.
Critical parameters to monitor for fault detection and protection include input voltage, output voltage, output current, and temperature. Monitoring these parameters can help detect faults such as overvoltage, undervoltage, overcurrent, and overheating.
When choosing input and output capacitors, consider the voltage rating, capacitance value, and equivalent series resistance (ESR). A general rule of thumb is to use capacitors with a voltage rating at least 1.5 times the maximum input voltage, and to choose capacitors with low ESR to minimize energy losses.
Recommended test and measurement procedures include using a DC power supply to set the input voltage, using a multimeter to measure output voltage and current, and using an oscilloscope to measure output voltage ripple and noise. It's also essential to follow proper safety procedures when working with electrical circuits.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NCV8114ASN250T1G Overview
Use the download button to access the NCV8114ASN250T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCV81,
or try a keyword search, such as Linear Regulator ICs
