NFZ2MSD131SN10L - Murata Electronics

NFZ2MSD131SN10L Frequently Asked Questions (FAQs)

• What is the recommended land pattern for NFZ2MSD131SN10L?
  Murata recommends a land pattern with a pad size of 1.3mm x 0.8mm, and a spacing of 0.5mm between pads. Refer to the Murata Land Pattern Design Guide for more information.
• Can I use the NFZ2MSD131SN10L in a high-temperature environment?
  The NFZ2MSD131SN10L is rated for operation up to 125°C, but it's recommended to derate the component's performance at higher temperatures. Consult the datasheet and Murata's reliability handbook for more information on temperature derating.
• How do I handle the NFZ2MSD131SN10L during assembly to prevent damage?
  Handle the component by the tabs or the body, avoiding touching the pins or the capacitive area. Use anti-static wrist straps, mats, or packaging to prevent electrostatic discharge (ESD) damage.
• What is the recommended soldering profile for NFZ2MSD131SN10L?
  Murata recommends a soldering profile with a peak temperature of 260°C, a dwell time above 240°C of 30-60 seconds, and a cooling rate of 3-5°C/second. Refer to the Murata Soldering Profile Guide for more information.
• Can I use the NFZ2MSD131SN10L in a humid or moist environment?
  The NFZ2MSD131SN10L is not hermetically sealed, so it's not recommended for use in humid or moist environments. If exposure to moisture is unavoidable, consider using a conformal coating or potting compound to protect the component.