The recommended power-up sequence is to apply VCC first, followed by VDD, and then the reset signal (RST). This ensures proper initialization of the display controller.
The backlight can be controlled through the BLEN (Backlight Enable) pin. Connect BLEN to VCC to enable the backlight, or connect it to GND to disable it. You can also use a PWM signal to adjust the backlight brightness.
The NHD-5.0-800480AF-ASXP display module is rated for operation between -20°C to 70°C (-4°F to 158°F).
Yes, the display's logic voltage (VDD) can be operated at 3.3V. However, the backlight voltage (VCC) requires a minimum of 4.5V to function properly.
After power-up, the display controller requires a software reset (SWRST) command to be sent to the display. This command is typically sent through the SPI or I2C interface, depending on the display's configuration.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NHD-5.0-800480AF-ASXP Overview
Use the download button to access the NHD-5.0-800480AF-ASXP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NHD-5,
or try a keyword search, such as LCD Displays
