Part Image

NL17SZ125DBVT1G - onsemi

Description: Designed for 1.65 V to 5.5 V VCC Operation; 24 mA Balanced Output Sink and Source Capability; Extremely High Speed: tPD 2.6 ns (typical) at VCC = 5 V; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; Near Zero Static Supply Current Substantially Reduces System Power Requirements; 3-State OE Input is Active-Low; Replacement for NC7SZ125; Chip Complexity = 36 FETS

Download NL17SZ125DBVT1G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
NL17SZ125DBVT1G - onsemi PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - SC-74A
click to zoom
3D Models
NL17SZ125DBVT1G - onsemi  - 3D model - SOT23 (5-Pin) - SC-74A
click to zoom

NL17SZ125DBVT1G Details

  • Manufacturer Part Number:

    NL17SZ125DBVT1G

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SC-74A-5 3.00x1.50x0.95, 0.95P

  • Package Description:

    SC-74A, 5 PIN

  • Manufacturer Package Code:

    318BQ

  • Country Of Origin:

    Mainland China

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    15 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    6.6

  • Control Type:

    ENABLE LOW

  • Count Direction:

    UNIDIRECTIONAL

  • Family:

    17SZ

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Load Capacitance (CL):

    50 pF

  • Logic IC Type:

    BUS DRIVER

  • Max I(ol):

    0.024 A

  • Moisture Sensitivity Level:

    1

  • Number of Bits:

    1

  • Number of Functions:

    1

  • Number of Ports:

    2

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -55 °C

  • Output Characteristics:

    3-STATE

  • Output Polarity:

    TRUE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power Supply Current-Max (ICC):

    0.01 mA

  • Prop. Delay@Nom-Sup:

    6 ns

  • Propagation Delay (tpd):

    10.5 ns

  • Seated Height-Max:

    1.1 mm

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    1.65 V

  • Supply Voltage-Nom (Vsup):

    2.3 V

  • Surface Mount:

    YES

  • Technology:

    TTL

  • Temperature Grade:

    MILITARY

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.5 mm

NL17SZ125DBVT1G Frequently Asked Questions (FAQs)

  • A good PCB layout for NL17SZ125DBVT1G involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, it's recommended to use a shielded cable for the output and to keep the device away from other noise-sensitive components.
  • To ensure proper power and decoupling, connect a 0.1uF ceramic capacitor between VCC and GND, and a 10uF electrolytic capacitor between VCC and GND. Place these capacitors as close to the device as possible. Also, ensure the power supply is stable and can provide the required current.
  • The NL17SZ125DBVT1G can operate up to 125 MHz, but the maximum frequency of operation depends on the specific application and the quality of the PCB layout. It's recommended to consult the datasheet and application notes for more information.
  • To handle thermal management, ensure good airflow around the device, and consider using a heat sink or thermal pad if the device is expected to operate at high temperatures or high frequencies. The device's thermal pad should be connected to a solid ground plane to help dissipate heat.
  • The recommended termination resistors for NL17SZ125DBVT1G depend on the specific application and the impedance of the transmission line. A common value is 50 ohms, but it's recommended to consult the datasheet and application notes for more information.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

NL17SZ125DBVT1G Overview

Use the download button to access the NL17SZ125DBVT1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NL17S, or try a keyword search, such as Bus Driver/Transceivers

Parts related to NL17SZ125DBVT1G

Showing 0 results

NL17SZ125DBVT1G Alternates

Showing results

Image Part Number Model
Part Image U74LVC1G125G-AF5-R Unisonic Technologies Co Ltd

Bus Driver, LVC/LCX/Z Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5

Part Image NC7SZ125M5_NL Fairchild Semiconductor Corporation

Bus Driver, LVC/LCX/Z Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5

Part Image SN74LVC1G125DBVTG4 Texas Instruments

Bus Driver, LVC/LCX/Z Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5

Part Image SN74LVC1G125DBVTE4 Texas Instruments

Bus Driver, LVC/LCX/Z Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5

Part Image TC7SZ125FTE85L Toshiba America Electronic Components

Bus Driver, LVC/LCX/Z Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5

For a full list of alternate parts for NL17SZ125DBVT1G, check out Findchips.com