NL27WZ08USG footprint, schematic symbol and 3D model by onsemi

Symbol

PCB Footprints

3D Models

NL27WZ08USG Details

The recommended oscillator crystal frequency for the NL27WZ08USG is 4 MHz or 8 MHz, depending on the application's requirements.
To configure the BOD, set the BODEN bit in the RCON register to enable the BOD. Then, set the BODV bits in the RCON register to select the desired voltage threshold (e.g., 2.5V, 2.7V, or 3.0V).
The NL27WZ08USG's I/O pins can source or sink up to 25 mA of current, but it's recommended to limit the current to 10 mA or less to ensure reliable operation.
To implement a WDT reset, set the WDTE bit in the RCON register to enable the WDT. Then, set the WDT period using the WDTPS bits in the RCON register. The WDT will reset the device if the WDT counter overflows.
The NL27WZ08USG can operate up to 24 MHz, but the maximum frequency depends on the specific application and the clock source used (e.g., internal oscillator, external oscillator, or clock input).

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the NL27WZ08USG schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like NL27W, or try a keyword search, such as Gates

If you searched for NL27WZ08USG, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	74LVC2G08DC-Q100 Nexperia AND Gate, LVC/LCX/Z Series, 2-Func, 2-Input, CMOS, PDSO8
	74LVC2G08DC Nexperia AND Gate, LVC/LCX/Z Series, 2-Func, 2-Input, CMOS, PDSO8
	NL27WZ08US onsemi AND Gate, 27WZ Series, 2-Func, 2-Input, CMOS, PDSO8
	74LVC2G08DC-G NXP Semiconductors AND Gate, LVC/LCX/Z Series, 2-Func, 2-Input, CMOS, PDSO8
	SN74LVC2G08DCUTE4 Texas Instruments AND Gate, LVC/LCX/Z Series, 2-Func, 2-Input, CMOS, PDSO8
For a full list of alternate parts for NL27WZ08USG, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →