Part Image

NL27WZ125USG - onsemi

Description: Extremely High Speed: tPD 2.6 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; 3-State OE Input is Active-Low; Replacement for NC7WZ125; Chip Complexity = 72 FETs; Pb-Free Package is Available

Download NL27WZ125USG Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
NL27WZ125USG - onsemi PCB footprint - Small Outline Packages - Small Outline Packages - US8 US SUFFIIX CASE 493-02 ISSUE B
click to zoom
3D Models
NL27WZ125USG - onsemi  - 3D model - Small Outline Packages - US8 US SUFFIIX CASE 493-02 ISSUE B
click to zoom

NL27WZ125USG Details

  • Manufacturer Part Number:

    NL27WZ125USG

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    US8

  • Pin Count:

    8

  • Manufacturer Package Code:

    493-01

  • Country Of Origin:

    Thailand

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    8 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    6

  • Logic IC Type:

    BUFFER

  • Moisture Sensitivity Level:

    1

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Time@Peak Reflow Temperature-Max (s):

    30

NL27WZ125USG Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from the power plane to minimize noise coupling.
  • Ensure the input clock signal is within the specified frequency range and has a sufficient amplitude. Also, ensure the PLL loop filter components are correctly selected and the VCO calibration is performed properly.
  • The maximum allowable frequency deviation is ±100 ppm. Exceeding this limit may affect PLL lock and overall performance.
  • Yes, an external VCO can be used, but it requires additional circuitry and careful impedance matching to ensure proper operation.
  • Check the input clock signal quality, PLL loop filter component values, and VCO calibration. Use a spectrum analyzer to verify the output frequency and check for spurs or noise.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

NL27WZ125USG Overview

Use the download button to access the NL27WZ125USG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NL27W, or try a keyword search, such as Bus Driver/Transceivers

Parts related to NL27WZ125USG

Showing 0 results

NL27WZ125USG Alternates

Showing results

Image Part Number Model
Part Image NL27WZ125USG Rochester Electronics LLC

LV/LV-A/LVX/H SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8, ROHS COMPLIANT, US-8

Part Image NL27WZ126US Rochester Electronics LLC

27WZ SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8, US-8

Part Image NLV27WZ125USG onsemi

Bus Driver, LVC/LCX/Z Series, 2-Func, 1-Bit, True Output, CMOS, PDSO8

Part Image NL27WZ125US onsemi

Bus Driver, LV/LV-A/LVX/H Series, 2-Func, 1-Bit, True Output, CMOS, PDSO8

Part Image NL27WZ126US onsemi

Bus Driver, 27WZ Series, 2-Func, 1-Bit, True Output, CMOS, PDSO8

For a full list of alternate parts for NL27WZ125USG, check out Findchips.com