The recommended soldering temperature is 260°C (500°F) with a maximum soldering time of 10 seconds. It's essential to follow the recommended soldering profile to prevent damage to the thermistor.
Handle the thermistors by the body, avoiding touching the leads or glass portion. Store them in a dry, cool place, away from direct sunlight and moisture. Avoid bending or flexing the leads, and do not stack thermistors on top of each other.
The thermal response time of the NTCALUG01A103GA is approximately 10-15 seconds in still air. This means it takes around 10-15 seconds for the thermistor to respond to a change in temperature.
While the NTCALUG01A103GA is designed to operate in a wide temperature range (-40°C to 150°C), it's not recommended for use in high-humidity environments (>80% RH) or extreme temperature fluctuations. Consult the datasheet and Vishay's application notes for specific guidance.
Calibration is not typically required for the NTCALUG01A103GA, as it's a standardized thermistor with a known resistance-temperature curve. However, if high accuracy is required, consult Vishay's application notes and calibration procedures for guidance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NTCALUG01A103GA Overview
Use the download button to access the NTCALUG01A103GA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NTCAL,
or try a keyword search, such as Non-linear Resistors
