The recommended soldering temperature is 260°C (500°F) for 10 seconds, with a peak temperature of 240°C (464°F) for 5 seconds. However, it's always best to consult the specific soldering guidelines for your application and manufacturing process.
Handle the thermistor by the glass body, avoiding touching the metal leads or the epoxy coating. Use gloves and a clean, dry work surface to prevent contamination. Avoid bending, flexing, or applying excessive force to the leads.
The maximum power rating for the NTCLE100E3103JB0A is 50 mW. Exceeding this rating can cause the thermistor to overheat, leading to reduced accuracy, shortened lifespan, or even failure.
While the NTCLE100E3103JB0A has a epoxy coating that provides some protection against moisture, it's not designed for use in high-humidity or wet environments. If you need to use the thermistor in such conditions, consider applying additional coatings or using a thermistor with a higher IP rating.
Calibration involves creating a lookup table or equation that maps the thermistor's resistance to temperature. You can use the datasheet's resistance-temperature curve as a starting point and then perform in-situ calibration using a precision temperature reference and a multimeter or other measurement device.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NTCLE100E3103JB0A Overview
Use the download button to access the NTCLE100E3103JB0A schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like NTCLE,
or try a keyword search, such as Non-linear Resistors
