Part Image

NV25040DWHFT3G - onsemi

Description: Automotive Temperatures Grade0: -40°C to +150°C/VCC = 2.5 V to 5.5 V; SOIC and TSSOP 8−pad Packages; 20/ 10 MHz SPI Compatible; SPI Modes (0,0) & (1,1); 16-byte Page Write Buffer; Self-timed Write Cycle; Hardware and Software Protection; Block Write Protection - Protect ¼, ½ or Entire EEPROM Array; Low Power CMOS Technology; 200 Year Data Retention; Additional Identification Page with Permanent Write Protection; NV Prefix for Automotive and Other Applications Requiring Site and Change Control; Program/Erase

Download NV25040DWHFT3G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
NV25040DWHFT3G - onsemi PCB footprint - Small Outline Packages - Small Outline Packages - 8-Pin SOIC
click to zoom
3D Models
NV25040DWHFT3G - onsemi  - 3D model - Small Outline Packages - 8-Pin SOIC
click to zoom

NV25040DWHFT3G Details

  • Manufacturer Part Number:

    NV25040DWHFT3G

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC-8

  • Package Description:

    SOIC-8

  • Manufacturer Package Code:

    751BD

  • Country Of Origin:

    Philippines

  • ECCN Code:

    3A001.a.2.a

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    onsemi

  • YTEOL:

    5

  • Clock Frequency-Max (fCLK):

    10 MHz

  • Data Retention Time-Min:

    200

  • Endurance:

    300000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Memory Density:

    4096 bit

  • Memory IC Type:

    EEPROM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    512 words

  • Number of Words Code:

    512

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    150 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    512X8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Programming Voltage:

    5 V

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.75 mm

  • Serial Bus Type:

    SPI

  • Standby Current-Max:

    0.00001 A

  • Supply Current-Max:

    0.002 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    2.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

  • Write Cycle Time-Max (tWC):

    4 ms

  • Write Protection:

    HARDWARE/SOFTWARE

NV25040DWHFT3G Frequently Asked Questions (FAQs)

  • A good PCB layout should ensure minimal inductance and resistance in the power paths. Thermal management is critical; use a heat sink with a thermal interface material, and ensure good airflow around the device. Refer to onsemi's application notes and thermal design guides for more information.
  • Choose input capacitors with low ESR and high ripple current capability. Output capacitors should have low ESR and be able to handle the output current. Consider the voltage rating, capacitance value, and physical size when selecting capacitors. Consult onsemi's application notes and capacitor selection guides for more information.
  • The soft-start feature helps reduce inrush current during startup. Set the soft-start time based on your system's requirements. The tracking feature allows for voltage tracking between outputs. Set the tracking voltage and ratio according to your system's needs. Refer to the datasheet and onsemi's application notes for more information.
  • The NV25040DWHFT3G has built-in overcurrent protection. Implement fault detection by monitoring the fault pin and responding to fault conditions according to your system's requirements. Consult the datasheet and onsemi's application notes for more information on fault detection and response.
  • Thermal derating is necessary to ensure the device operates within its safe operating area. Derate the device's power rating based on the ambient temperature, PCB layout, and airflow. Consult onsemi's thermal derating guidelines and application notes for more information.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

NV25040DWHFT3G Overview

Use the download button to access the NV25040DWHFT3G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NV250, or try a keyword search, such as EEPROMs

Parts related to NV25040DWHFT3G

Showing 0 results