NXJ1S1205MC-R13 - Murata Electronics

NXJ1S1205MC-R13 Frequently Asked Questions (FAQs)

• What is the recommended land pattern for NXJ1S1205MC-R13?
  Murata recommends a land pattern with a pad size of 1.3mm x 0.8mm and a spacing of 0.5mm between pads. The recommended land pattern is available in the Murata's documentation and can be found on their website.
• Can I use the NXJ1S1205MC-R13 in a high-temperature environment?
  The NXJ1S1205MC-R13 is rated for operation up to 125°C, but it's recommended to derate the voltage and current ratings above 85°C. Consult the datasheet and Murata's application notes for more information on high-temperature operation.
• How do I handle the NXJ1S1205MC-R13 during soldering and rework?
  Murata recommends following the J-STD-020D standard for soldering and rework. The device can withstand a maximum of 3 reflow cycles at 260°C peak temperature. Use a soldering iron with a temperature of 350°C or less, and avoid applying excessive force or pressure during rework.
• What is the recommended storage condition for NXJ1S1205MC-R13?
  Murata recommends storing the NXJ1S1205MC-R13 in a dry, cool place with a temperature range of 5°C to 30°C and humidity below 60%. Avoid exposing the devices to direct sunlight, moisture, or extreme temperatures.
• Can I use the NXJ1S1205MC-R13 in a humid or moist environment?
  The NXJ1S1205MC-R13 is not designed for use in humid or moist environments. If the device is exposed to moisture, it may lead to corrosion or electrical failures. Consider using a conformal coating or potting compound to protect the device in humid environments.