P1330R-223K - API Delevan

P1330R-223K Frequently Asked Questions (FAQs)

• What is the recommended PCB layout and land pattern for optimal performance?
  API Delevan recommends a PCB layout with a minimum of 10 mil (0.25 mm) spacing between the inductor and other components. A symmetrical land pattern with a 20 mil (0.5 mm) diameter pad is recommended for optimal performance and thermal management.
• How does the inductor perform in high-temperature environments?
  The P1330R-223K is rated for operation up to 125°C, but derating is recommended above 85°C. API Delevan recommends consulting their application notes for thermal management and derating guidelines.
• What is the self-resonant frequency (SRF) of the inductor?
  The SRF of the P1330R-223K is not explicitly stated in the datasheet, but it can be estimated using the inductance and capacitance values. API Delevan recommends consulting their application notes or contacting their technical support for SRF calculations.
• Can the inductor be used in high-vibration or high-shock environments?
  The P1330R-223K is designed to meet the requirements of MIL-STD-202, but API Delevan recommends consulting their application notes and performing environmental testing to ensure the inductor meets the specific requirements of the application.
• What is the recommended soldering profile for the inductor?
  API Delevan recommends a soldering profile with a peak temperature of 260°C (500°F) and a dwell time of 10-15 seconds. A soldering iron with a temperature range of 200-240°C (392-464°F) is recommended for hand soldering.