The recommended footprint and land pattern for P4KE30CA can be found in the Littelfuse application note AN9313, which provides guidelines for surface mount assembly of TVS diodes.
To ensure reliability in high-temperature applications, it's essential to follow the recommended derating curves for the P4KE30CA, which can be found in the datasheet. Additionally, consider using a thermally conductive interface material to improve heat dissipation.
Yes, the P4KE30CA can be used for both unidirectional and bidirectional overvoltage protection. However, for bidirectional protection, two P4KE30CA devices should be connected in series, with the anodes tied together and the cathodes connected to the circuit to be protected.
The maximum allowable voltage for P4KE30CA during an ESD event is 30kV, as specified in the datasheet. Exceeding this voltage may damage the device.
To select the correct P4KE30CA variant, consider the working voltage, peak pulse current, and clamping voltage required for your application. Refer to the datasheet and consult with a Littelfuse application engineer if necessary.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
P4KE30CA Overview
Use the download button to access the P4KE30CA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like P4KE3,
or try a keyword search, such as Transient Suppressors
