The recommended PCB footprint for P6SMB120CA is a standard SMB footprint with a pad size of 1.5 mm x 3.5 mm and a spacing of 1.9 mm between pads.
While P6SMB120CA is rated for operation up to 150°C, it's recommended to derate the voltage and current ratings at higher temperatures to ensure reliable operation. Consult the datasheet for derating curves.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder to the pads. Avoid applying excessive heat or solder, as this can damage the device.
Yes, P6SMB120CA is compatible with lead-free soldering processes, such as SAC305 or Sn96.5Ag3Cu0.5. However, ensure that the soldering process is optimized for the specific lead-free alloy used.
The typical response time of P6SMB120CA to an overvoltage event is around 1-2 nanoseconds. However, this can vary depending on the specific application and circuit conditions.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
P6SMB120CA Overview
Use the download button to access the P6SMB120CA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like P6SMB,
or try a keyword search, such as Transient Suppressors
