The recommended footprint and land pattern for P6SMB250A can be found in the Littelfuse application note AN9313, which provides guidelines for surface mount assembly of TVS diodes.
To ensure reliability in high-temperature applications, it is recommended to derate the power rating of P6SMB250A according to the temperature derating curve provided in the datasheet. Additionally, ensure that the device is properly soldered and that the PCB is designed to minimize thermal resistance.
Yes, P6SMB250A can be used in a bidirectional configuration by connecting two devices in series, with the anodes tied together and the cathodes connected to the circuit to be protected. However, this configuration will reduce the overall surge capability of the device.
The maximum allowable voltage for P6SMB250A during a surge event is the clamping voltage, which is specified in the datasheet as 43.2V. However, it is recommended to design the circuit to ensure that the voltage during a surge event does not exceed the maximum rated voltage of 250V.
To select the correct P6SMB250A device, consider the following factors: the maximum voltage and current of the circuit to be protected, the desired clamping voltage, and the available board space and layout constraints. Consult the datasheet and application notes for guidance on selecting the appropriate device.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
P6SMB250A Overview
Use the download button to access the P6SMB250A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like P6SMB,
or try a keyword search, such as Transient Suppressors
