PDME2-S5-S24-S - CUI Inc.

PDME2-S5-S24-S Frequently Asked Questions (FAQs)

• What is the recommended PCB layout and thermal management for optimal performance?
  CUI recommends a PCB layout with a solid ground plane and thermal vias to dissipate heat. A minimum of 2oz copper thickness is recommended. Additionally, a thermal interface material (TIM) with a thermal conductivity of 1W/m-K or higher is suggested between the module and the heat sink.
• How do I ensure reliable operation in high-vibration environments?
  CUI recommends following the recommended PCB mounting and screw torque specifications to ensure the module is securely fastened. Additionally, using a conformal coating and potting the module can help improve reliability in high-vibration environments.
• What is the maximum allowable capacitance for the output filter?
  CUI recommends an output filter capacitance of 10uF or less to ensure stable operation. Exceeding this value may cause oscillations or instability in the output voltage.
• Can I use this module in a redundant or N+1 configuration?
  Yes, the PDME2-S5-S24-S can be used in a redundant or N+1 configuration. However, CUI recommends consulting with their application engineers to ensure proper design and implementation to avoid any potential issues.
• What is the typical MTBF (Mean Time Between Failures) for this module?
  CUI estimates the MTBF for the PDME2-S5-S24-S to be around 1.5 million hours, based on MIL-HDBK-217F calculations. However, this value may vary depending on the specific application and operating conditions.