ROHM recommends a compact PCB layout with short traces and minimal vias to reduce parasitic inductance and capacitance. A 4-layer PCB with a dedicated ground plane is recommended. Refer to ROHM's application note for more details.
To ensure reliability, follow ROHM's recommended operating conditions and derating guidelines. Implement proper thermal management, such as heat sinks or thermal pads, to keep the junction temperature below 150°C. Also, consider using a thermally conductive PCB material.
While the datasheet specifies a maximum voltage rating of 2.0B, ROHM recommends limiting voltage transients to 1.5 times the rated voltage to ensure device reliability. Exceeding this limit may cause permanent damage or affect long-term reliability.
Yes, PDZVTR2.0B can be used in switching regulator applications. However, ensure that the device is properly bypassed with capacitors and that the switching frequency is within the recommended range to minimize electromagnetic interference (EMI) and radio-frequency interference (RFI).
To prevent electrostatic discharge (ESD) damage, handle PDZVTR2.0B with ESD-protected equipment and follow proper ESD handling procedures. Use an ESD wrist strap or mat, and ensure that the workspace is ESD-protected.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PDZVTR2.0B Overview
Use the download button to access the PDZVTR2.0B schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PDZVT,
or try a keyword search, such as Zener Diodes
