A good PCB layout for the PI3USB31ZUAEX involves keeping the input and output traces as short as possible, using a solid ground plane, and minimizing the distance between the device and the USB connector. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
The PI3USB31ZUAEX requires a single 3.3V power supply. The device should be powered up after the power supply has reached a stable state. The power sequencing requirement is to power up the device after the 3.3V supply has reached 2.9V.
The PI3USB31ZUAEX has built-in ESD protection diodes on the USB data lines, which can withstand up to ±8kV of ESD. To prevent latch-up, it is recommended to use a series resistor on the upstream data lines and to ensure that the device is powered up and down slowly.
The PI3USB31ZUAEX has a built-in overcurrent protection feature that can be enabled by connecting the OCP pin to the 3.3V supply. The device will automatically limit the downstream current to 500mA when an overcurrent condition is detected.
The PI3USB31ZUAEX has a maximum junction temperature of 150°C. To ensure reliable operation, the device should be mounted on a PCB with a solid ground plane and thermal vias to dissipate heat. A thermal pad on the bottom of the package can also be used to improve heat dissipation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PI3USB31ZUAEX Overview
Use the download button to access the PI3USB31ZUAEX 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PI3US,
or try a keyword search, such as Multiplexers or Switches
