Fastron recommends a 4-layer PCB with a solid ground plane and a separate power plane for the input and output stages. A minimum of 2 oz copper thickness is recommended for the power planes.
Fastron recommends a heat sink with a thermal resistance of ≤ 10 K/W. The heat sink should be attached to the device using a thermal interface material with a thermal conductivity of ≥ 1 W/mK.
The maximum allowed voltage transient is ±10% of the nominal input voltage for a duration of ≤ 100 ms. Exceeding this limit may damage the device.
Yes, the PISR-101M-04 can be used in a redundant configuration. However, it's essential to ensure that the devices are properly synchronized and that the system is designed to handle the increased power consumption and heat generation.
The typical start-up time for the PISR-101M-04 is ≤ 10 ms. However, this time may vary depending on the input voltage, output load, and system configuration.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PISR-101M-04 Overview
Use the download button to access the PISR-101M-04 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PISR-,
or try a keyword search, such as Fixed Inductors
