A symmetrical layout with a solid ground plane and minimal signal trace length is recommended. Keep the input and output traces separate and avoid crossing them over each other.
Use a 10uF ceramic capacitor in parallel with a 100nF ceramic capacitor, both connected between the input and ground pins. Place them as close to the device as possible.
The PJ-008A is rated for a maximum input voltage of 6V. Exceeding this voltage may damage the device.
The PJ-008A is rated for operation up to 85°C. However, derating the output current is recommended for temperatures above 70°C to ensure reliable operation.
Check the input voltage, output voltage, and output current. Verify that the device is properly decoupled and the PCB layout is correct. Consult the datasheet and application notes for further guidance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PJ-008A Overview
Use the download button to access the PJ-008A 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PJ-00,
or try a keyword search, such as DC Power Plugs or Jacks
About Same Sky
CUI Devices is an electronic components manufacturer that specializes in audio components, interconnects, motion, relay, switch and thermal management solutions. The company designs and manufacturers components for use in a wide range of industries that include aerospace, industrial, medical, and telecommunications.
CUI Devices is headquartered in Lake Oswego, Oregon.
