Bivar recommends a PCB layout with a solid ground plane and a thermal relief pattern to ensure good heat dissipation. A minimum of 1 oz copper thickness is recommended. Additionally, a thermal interface material (TIM) can be used to improve heat transfer between the LED and the heat sink.
Bivar recommends following the recommended soldering profile and using a solder with a melting point below 240°C. The LED should be soldered within 5 seconds of applying heat, and the peak temperature should not exceed 260°C. Avoid using excessive force or bending the leads during the soldering process.
The maximum allowable voltage for the PLPC1-250 is 3.5V. Exceeding this voltage can reduce the LED's lifespan. Bivar recommends operating the LED within the recommended voltage range to ensure optimal performance and longevity.
The PLPC1-250 is rated for operation up to 85°C. However, the LED's performance will degrade at higher temperatures. Bivar recommends derating the LED's current by 1.5mA for every 10°C above 60°C to ensure reliable operation.
The recommended drive current for the PLPC1-250 is 20mA. Operating the LED at higher currents can increase brightness but may reduce its lifespan. Bivar recommends operating the LED within the recommended current range to ensure optimal performance and longevity.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PLPC1-250 Overview
Use the download button to access the PLPC1-250 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PLPC1,
or try a keyword search, such as Optoelectronic Accessories
