PLT10HH450180PNK - Murata Electronics

PLT10HH450180PNK Frequently Asked Questions (FAQs)

• What is the recommended land pattern for the PLT10HH450180PNK?
  The recommended land pattern for the PLT10HH450180PNK is a rectangular pad with a size of 4.5mm x 3.2mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask opening of 4.1mm x 2.8mm.
• How do I handle the PLT10HH450180PNK's high current rating during PCB design?
  To handle the high current rating of the PLT10HH450180PNK, ensure that the PCB traces and vias are designed to handle the maximum current rating of 10A. Use a sufficient trace width and thickness, and consider using multiple vias to reduce the current density.
• What is the thermal derating curve for the PLT10HH450180PNK?
  The thermal derating curve for the PLT10HH450180PNK is not explicitly provided in the datasheet. However, as a general guideline, it's recommended to derate the inductor's current rating by 1.5% to 2% per degree Celsius above the maximum operating temperature of 125°C.
• Can I use the PLT10HH450180PNK in a high-frequency application?
  The PLT10HH450180PNK is designed for high-frequency applications, but its performance may degrade above 100 MHz. For frequencies above 100 MHz, consider using a different inductor or consulting with Murata's application engineers for guidance.
• How do I ensure the PLT10HH450180PNK is properly soldered during the assembly process?
  To ensure proper soldering, follow the recommended soldering conditions: peak temperature of 260°C, soldering time of 3 seconds, and a soldering iron temperature of 350°C. Use a solder with a melting point of 217°C or higher, and ensure the component is properly aligned during the assembly process.