First Sensor provides a recommended PCB layout and land pattern in their application note AN-PS13-5B-TO5, which can be found on their website. It's essential to follow this layout to ensure proper sensor operation and minimize noise.
The PS13-5B-TO5 is a ratiometric sensor, and calibration is typically done by the manufacturer. However, if you need to perform a two-point calibration, you can use the sensor's internal trimmers to adjust the offset and span. Consult the datasheet and application notes for more information.
The PS13-5B-TO5 has a maximum pressure rating of 5 bar (73 psi), but it's essential to note that exceeding this rating can cause permanent damage to the sensor. Always ensure that the sensor is operated within its specified pressure range.
The PS13-5B-TO5 has a IP40 rating, which means it's protected against solid objects larger than 1 mm, but it's not sealed against moisture. If you need to use the sensor in a humid or wet environment, consider adding additional protection, such as a conformal coating or a sealed enclosure.
The response time of the PS13-5B-TO5 is typically around 1 ms, but this can vary depending on the specific application and environmental conditions. If you need a faster response time, consider using a different sensor or optimizing your system design.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PS13-5B-TO5 Overview
Use the download button to access the PS13-5B-TO5 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PS13-,
or try a keyword search, such as Photo Diodes
