Part Image

PT65121 - Apem

Description: Dip Switch SP4T 4 Position Through Hole Rotary for Tool Actuator 150mA 24VDC

Download PT65121 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
PT65121 - Apem PCB footprint - Other - Other - PT65121-1
click to zoom
3D Models
PT65121 - Apem  - 3D model - Other - PT65121-1
click to zoom

PT65121 Details

  • Manufacturer Part Number:

    PT65121

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    UK

  • ECCN Code:

    EAR99

  • HTS Code:

    8536.50.90.20

  • Manufacturer:

    APEM Inc

  • YTEOL:

    7

  • Actuator Material:

    NYLON

  • Actuator Type:

    ARROW SHAPED SLOT

  • Additional Feature:

    O-RING Si RUBBER ACTUATOR SEAL

  • Body Breadth:

    10 mm

  • Body Height:

    6.5 mm

  • Body Length or Diameter:

    10 mm

  • Center Contact Material:

    PHOSPHOR BRONZE

  • Center Contact Plating:

    GOLD OVER NICKEL

  • Contact Current(DC)-Max:

    0.4 A

  • Contact (DC) Max Power Rating R Load:

    1.5VA@24VDC

  • Contact (DC) Max Rating R Load:

    .4A@24VDC

  • Contact Function:

    ON-ON

  • Contact Resistance:

    0.08 mΩ

  • Contact Timing:

    BREAK-BEFORE-MAKE

  • Contact Voltage(DC)-Max:

    24 V

  • Electrical Life:

    10000 Cycle(s)

  • End Contact Material:

    PHOSPHOR BRONZE

  • End Contact Plating:

    GOLD OVER NICKEL

  • Indexing Angle:

    90 deg

  • Insulation Resistance:

    100000000 Ω

  • Insulator Material:

    THERMOPLASTIC

  • JESD-609 Code:

    e4

  • Mounting Feature:

    THROUGH HOLE-STRAIGHT

  • Number of Positions:

    4

  • Number of Switch Sections:

    1

  • Operating Temperature-Max:

    70 °C

  • Operating Temperature-Min:

    -20 °C

  • PCB Hole Count:

    6

  • Sealing:

    MOLDED

  • Solderability:

    WAVE

  • Surface Mount:

    NO

  • Switch Action:

    LATCHED

  • Switch Function:

    BINARY CODED DECIMAL

  • Switch Type:

    ROTARY CODED SWITCH

  • Terminal Finish:

    Gold (Au) - with Nickel (Ni) barrier

  • Terminal Length:

    0.15 inch

  • Terminal Material:

    BRASS

  • Termination Type:

    SOLDER

  • Washability:

    SOLVENT

PT65121 Frequently Asked Questions (FAQs)

  • APEM recommends a 4-layer PCB with a solid ground plane and a separate power plane for the PT65121. Keep the input and output traces short and separate to minimize noise and EMI.
  • Use a heat sink or thermal pad to dissipate heat. Ensure good airflow and keep the device away from heat sources. Derate the output current and voltage according to the temperature derating curve in the datasheet.
  • Use a metal shield or screen to enclose the device. Keep the input and output cables short and twisted. Add EMI filters or chokes to the input and output lines if necessary. Follow good PCB layout practices to minimize radiation.
  • Yes, but ensure that the devices are synchronized and phase-locked to prevent oscillations. Use a common input voltage and ensure that the output voltages are matched. Consult APEM's application notes for more information.
  • Ensure the device is used within the specified voltage and current ratings. Use protective devices such as fuses or circuit breakers to prevent overcurrent. Follow proper safety procedures when handling the device and PCB.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

PT65121 Overview

Use the download button to access the PT65121 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PT651, or try a keyword search, such as Rotary Switches

Parts related to PT65121

Showing 0 results