Part Image

PT65301 - Apem

Description: Coded Rotary Switches 9.5mm 10 POS. ROTARY

Download PT65301 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
PT65301 - Apem  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

PT65301 Details

  • Manufacturer Part Number:

    PT65301

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    UK

  • ECCN Code:

    EAR99

  • HTS Code:

    8536.50.90.20

  • Manufacturer:

    APEM Inc

  • YTEOL:

    7

  • Actuator Length:

    0.287 inch

  • Actuator Material:

    NYLON

  • Actuator Type:

    SPINDLE

  • Additional Feature:

    O-RING Si RUBBER ACTUATOR SEAL

  • Body Breadth:

    10 mm

  • Body Height:

    6.5 mm

  • Body Length or Diameter:

    10 mm

  • Center Contact Material:

    PHOSPHOR BRONZE

  • Center Contact Plating:

    GOLD OVER NICKEL

  • Contact Current(DC)-Max:

    0.4 A

  • Contact (DC) Max Power Rating R Load:

    1.5VA@24VDC

  • Contact (DC) Max Rating R Load:

    .4A@24VDC

  • Contact Function:

    ON-OFF

  • Contact Resistance:

    0.08 mΩ

  • Contact Timing:

    BREAK-BEFORE-MAKE

  • Contact Voltage(DC)-Max:

    24 V

  • Electrical Life:

    10000 Cycle(s)

  • End Contact Material:

    PHOSPHOR BRONZE

  • End Contact Plating:

    GOLD OVER NICKEL

  • Indexing Angle:

    36 deg

  • Insulation Resistance:

    100000000 Ω

  • Insulator Material:

    THERMOPLASTIC

  • JESD-609 Code:

    e3

  • Mounting Feature:

    THROUGH HOLE-STRAIGHT

  • Number of Positions:

    10

  • Number of Switch Sections:

    1

  • Operating Temperature-Max:

    70 °C

  • Operating Temperature-Min:

    -20 °C

  • PCB Hole Count:

    6

  • Packing Method:

    TRAY

  • Sealing:

    MOLDED

  • Solderability:

    WAVE

  • Surface Mount:

    NO

  • Switch Action:

    LATCHED

  • Switch Function:

    BINARY CODED DECIMAL

  • Switch Type:

    ROTARY CODED SWITCH

  • Terminal Finish:

    Tin (Sn)

  • Terminal Length:

    0.15 inch

  • Terminal Material:

    BRASS

  • Termination Type:

    SOLDER

  • Washability:

    SOLVENT

PT65301 Frequently Asked Questions (FAQs)

  • APEM recommends a 4-layer PCB with a solid ground plane, and a separate power plane for the input and output. The input and output capacitors should be placed as close as possible to the device.
  • APEM recommends a heat sink with a thermal resistance of 10°C/W or lower. The heat sink should be attached to the device using a thermal interface material with a thermal conductivity of 1 W/m-K or higher.
  • APEM recommends limiting voltage transients to 10% of the nominal input voltage to prevent damage to the device.
  • The PT65301 is rated for operation up to 125°C, but APEM recommends derating the output power by 1% for every 10°C above 85°C to ensure reliable operation.
  • APEM recommends checking the input voltage, output voltage, and output current to identify the source of the issue. APEM also provides a troubleshooting guide in the application note.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

PT65301 Overview

Use the download button to access the PT65301 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PT653, or try a keyword search, such as Rotary Switches

Parts related to PT65301

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview