Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize inductance and noise. A 4-layer PCB with a dedicated power plane is also recommended.
To ensure reliability, follow the recommended derating curves for temperature and voltage, and ensure proper thermal management, such as using a heat sink or thermal interface material. Also, consider using a thermally conductive potting material to reduce thermal stress.
The maximum surge current rating for the PV37W105C01B00 is not explicitly stated in the datasheet. However, Bourns recommends following the industry-standard surge test methods, such as IEC 61000-4-5, to determine the device's surge current capability.
Yes, the PV37W105C01B00 can be used in a parallel configuration to increase the power rating. However, it's essential to ensure that the devices are properly matched, and the PCB layout is designed to minimize current imbalance and thermal mismatch between the devices.
Bourns recommends following the IEC 61000-4-2 standard for ESD protection, and using a human-body model (HBM) with a 100 pF capacitor and a 1.5 kΩ resistor. Additionally, consider using ESD protection devices, such as TVS diodes, to protect the PV37W105C01B00 from ESD events.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PV37W105C01B00 Overview
Use the download button to access the PV37W105C01B00 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PV37W,
or try a keyword search, such as Variable Resistors
