Bourns provides a recommended PCB layout in their application note AN164, which includes guidelines for component placement, trace routing, and thermal management to ensure optimal performance and reliability.
The selection of input and output capacitors depends on the specific application requirements. Bourns recommends using low-ESR capacitors with a voltage rating of at least 2x the input voltage. The output capacitor should be selected based on the output voltage and current requirements. Refer to the datasheet and application notes for more information.
The PWR2010WR100JE has an operating temperature range of -40°C to +125°C, with a maximum junction temperature of 150°C. However, it's essential to ensure that the device is operated within the recommended temperature range to maintain reliability and performance.
To ensure EMC, follow proper PCB design and layout practices, such as using a solid ground plane, minimizing loop areas, and using shielding if necessary. Additionally, consider using EMI filters or common-mode chokes on the input and output lines. Bourns provides guidance on EMC in their application notes and datasheets.
The recommended input voltage range for the PWR2010WR100JE is 7V to 36V. Operating the device outside of this range may affect its performance, reliability, or even cause damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PWR2010WR100JE Overview
Use the download button to access the PWR2010WR100JE schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PWR20,
or try a keyword search, such as Wire Wound Resistors
