Bourns provides a recommended PCB layout and land pattern in their application notes and design guides. It's essential to follow these guidelines to ensure optimal performance, low thermal resistance, and minimal electromagnetic interference (EMI).
To minimize electromagnetic interference (EMI), keep the inductor at least 5 mm away from sensitive components, such as oscillators, antennas, or other inductors. You can also use shielding techniques, like copper tape or mu-metal shielding, to contain the magnetic field.
Bourns recommends derating the voltage by 10-15% to ensure reliable operation. For the PWR263S-35-1000J, the maximum allowable voltage is 35V, so the derated voltage would be around 31-32V.
The SRF can be calculated using the inductor's inductance, capacitance, and resistance values. For the PWR263S-35-1000J, the SRF is approximately 150 MHz. To minimize the impact of SRF, ensure your operating frequency is below the SRF, and consider using a series resistor or capacitor to dampen resonant peaks.
The thermal resistance of the PWR263S-35-1000J is approximately 10°C/W. This means that for every watt of power dissipated, the inductor's temperature will rise by 10°C. Ensure your design takes into account the inductor's thermal resistance to prevent overheating and premature failure.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PWR263S-35-1000J Overview
Use the download button to access the PWR263S-35-1000J schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PWR26,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
Suggested Parts
If you searched for PWR263S-35-1000J, you might also be interested in these parts:
