RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Yes, the R24P209S is designed to withstand high-vibration environments. However, it's recommended to follow the recommended PCB layout and mounting guidelines to ensure the module is securely attached to the PCB. Additionally, the module's solder joints should be inspected regularly to ensure they remain intact.
The R24P209S meets various safety certifications, including UL60950-1, EN60950-1, and IEC60950-1. To ensure compliance, follow the recommended application circuit, and ensure the module is used within its specified operating conditions. Additionally, consult with RECOM Power Inc or a certified safety expert to ensure compliance with specific regulatory requirements.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the input voltage range. The capacitor should be placed as close as possible to the module's input pins to minimize noise and ensure stable operation.
Yes, the R24P209S can be used in a redundant or parallel configuration to achieve higher power ratings or redundancy. However, it's essential to follow RECOM's guidelines for parallel operation, including using identical modules, ensuring proper synchronization, and implementing adequate overcurrent protection.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
R24P209S Overview
Use the download button to access the R24P209S schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R24P2,
or try a keyword search, such as Power Supply Modules
