RECOM recommends a PCB layout with a large copper area for heat dissipation, and a thermal management system with a heat sink and thermal interface material to keep the junction temperature below 125°C.
The R2S-2405-R is certified to UL60950-1, EN60950-1, and IEC60950-1 safety standards. Ensure your application meets the required safety certifications by following the recommended layout, component selection, and testing guidelines provided by RECOM.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10-22uF, depending on the input voltage and ripple requirements, to ensure stable operation and minimize input voltage ripple.
Use an oscilloscope to monitor the input and output voltages, and check for any signs of oscillation or instability. Also, verify the input voltage, output load, and PCB layout meet the recommended specifications. Consult the RECOM application notes and technical support for further assistance.
The maximum allowed output capacitance is 47uF. Exceeding this value may cause instability or oscillation. Ensure the output capacitance is within the recommended range to ensure stable operation.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
R2S-2405-R Overview
Use the download button to access the R2S-2405-R schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R2S-2,
or try a keyword search, such as Power Supply Modules
