Part Image

R5F72147BDFP#V1 - Renesas Electronics

Description: The SH7216 Series with 32-bit SH-2A CPU core offers a maximum operating frequency of 200 MHz, representing a 1.25-fold improvement in performance over the 160 MHz of Renesas Electronics's existing the SH7211. They also include large-capacity high-speed flash memory and RAM through the use of cutting-edge flash memory technology. Featuring an on-chip power supply step-down circuit, these microcontrollers are designed to achieve lower current dissipation by suppressing the increase in current dissipation asso

Download R5F72147BDFP#V1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
R5F72147BDFP#V1 - Renesas Electronics PCB footprint - Quad Flat Packages - Quad Flat Packages - P-LFQFP176-24x24-0.5
click to zoom
3D Models
R5F72147BDFP#V1 - Renesas Electronics  - 3D model - Quad Flat Packages - P-LFQFP176-24x24-0.5
click to zoom

R5F72147BDFP#V1 Details

  • Manufacturer Part Number:

    R5F72147BDFP#V1

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Not Recommended

  • Part Package Code:

    LQFP

  • Package Description:

    LQFP-176

  • Pin Count:

    176

  • Manufacturer Package Code:

    PLQP0176KB

  • HTS Code:

    8542.31.00.25

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    9

  • Has ADC:

    YES

  • Address Bus Width:

    26

  • Bit Size:

    32

  • Boundary Scan:

    YES

  • CPU Family:

    SH-2A

  • Clock Frequency-Max:

    12.5 MHz

  • DAC Channels:

    NO

  • DMA Channels:

    YES

  • External Data Bus Width:

    32

  • Format:

    FLOATING POINT

  • Integrated Cache:

    YES

  • JESD-30 Code:

    S-PQFP-G176

  • Length:

    24 mm

  • Low Power Mode:

    YES

  • Number of DMA Channels:

    8

  • Number of External Interrupts:

    9

  • Number of I/O Lines:

    110

  • Number of Serial I/Os:

    6

  • Number of Terminals:

    176

  • Number of Timers:

    11

  • On Chip Data RAM Width:

    8

  • On Chip Program ROM Width:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • PWM Channels:

    YES

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LFQFP

  • Package Equivalence Code:

    QFP176,1.0SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    NOT SPECIFIED

  • RAM (bytes):

    131072

  • ROM (words):

    1048576

  • ROM Programmability:

    FLASH

  • Seated Height-Max:

    1.7 mm

  • Speed:

    200 MHz

  • Supply Current-Max:

    200 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3.3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    NOT SPECIFIED

  • Width:

    24 mm

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER, RISC

R5F72147BDFP#V1 Frequently Asked Questions (FAQs)

  • The recommended power-on sequence is to apply VCC first, followed by VDD, and then the clock signal. This ensures proper initialization and prevents latch-up.
  • To configure the internal oscillator, set the OSCCR register to select the desired frequency, and then trim the oscillator using the OSCTCR register. Refer to the datasheet for specific values and procedures.
  • The maximum allowed capacitance for the VCC and VDD power pins is 10nF. Exceeding this value may cause power-on reset issues or affect the microcontroller's overall performance.
  • Yes, the R5F72147BDFP#V1 is rated for operation up to 125°C. However, ensure that the device is properly heat-sinked and follow the recommended thermal design guidelines to prevent overheating.
  • To implement a WDT, configure the WDTCSR register to enable the watchdog timer, set the timeout period using the WDTCSR and WDTCR registers, and periodically refresh the WDT using the WDTCSR register.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

R5F72147BDFP#V1 Overview

Use the download button to access the R5F72147BDFP#V1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R5F72, or try a keyword search, such as Microcontrollers

Parts related to R5F72147BDFP#V1

Showing 0 results