ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane to reduce thermal resistance.
To ensure stable operation with a high-impedance output load, ROHM recommends adding a 10nF to 100nF capacitor in parallel with the output to reduce oscillation and improve stability. Additionally, a series resistor (e.g., 10Ω to 100Ω) can be added to the output to further improve stability.
ROHM recommends using a low-ESR ceramic capacitor (e.g., X5R or X7R) with a value between 1μF to 10μF, depending on the input voltage and output current requirements. The capacitor should be placed as close as possible to the VIN pin to reduce noise and improve performance.
ROHM recommends using a voltage supervisor or a voltage detector to monitor the input voltage and reset the device or trigger an interrupt if the voltage exceeds the recommended operating range. Additionally, a TVS diode or a zener diode can be used to protect the device from overvoltage conditions.
While the R6015ENXC7G is rated for operation up to 105°C, ROHM recommends operating the device within a temperature range of -40°C to 85°C for long-term reliability and to minimize the risk of thermal-related failures.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
R6015ENXC7G Overview
Use the download button to access the R6015ENXC7G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R6015,
or try a keyword search, such as Power Field-Effect Transistors
