A good PCB layout for the R6020ENX should include a solid ground plane, separate analog and digital grounds, and a decoupling capacitor (e.g., 10uF) between VIN and GND. Additionally, keep the input and output capacitors close to the IC and use short, wide traces for the power lines.
Choose input capacitors with low ESR (Equivalent Series Resistance) and high ripple current rating. For output capacitors, select ones with low ESR, high capacitance, and a voltage rating above the output voltage. A good starting point is a 10uF input capacitor and a 22uF output capacitor.
The R6020ENX can operate in an ambient temperature range of -40°C to 105°C. However, the device's junction temperature (TJ) should not exceed 125°C to ensure reliable operation.
To ensure stability, follow the recommended PCB layout, use a sufficient output capacitor, and add a 10nF capacitor between the FB pin and GND. Also, avoid using long, thin traces for the feedback loop and keep the feedback components close to the IC.
The R6020ENX can operate with an input voltage as low as 2.5V, but the recommended minimum input voltage is 3.0V to ensure stable operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
R6020ENX Overview
Use the download button to access the R6020ENX schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R6020,
or try a keyword search, such as Power Field-Effect Transistors
