ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A 4-layer PCB with a solid ground plane and thermal vias is also recommended.
To ensure stable output voltage regulation, it's essential to follow the recommended input and output capacitor values, as well as the suggested PCB layout. Additionally, ensure that the input voltage is within the recommended range, and the output current is within the specified maximum rating.
Although not explicitly stated in the datasheet, ROHM recommends keeping the input voltage ripple below 1% of the input voltage to ensure stable operation and prevent oscillations.
The R6020JNZ4C13 is rated for operation up to 125°C, but it's essential to consider the derating curves for output current and power dissipation at higher temperatures. Ensure that the device is properly heatsinked and the thermal design is adequate for the specific application.
The R6020JNZ4C13 has built-in overcurrent protection, but it's still recommended to add external protection, such as a fuse or a current-limiting resistor, to prevent damage from excessive current or short-circuit conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
R6020JNZ4C13 Overview
Use the download button to access the R6020JNZ4C13 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like R6020,
or try a keyword search, such as Power Field-Effect Transistors
