A recommended PCB layout for RABF28-13 includes a solid ground plane, short and wide traces for power and ground, and a decoupling capacitor (e.g., 100nF) placed close to the device. Additionally, keep the input and output traces separate to minimize noise coupling.
To ensure proper biasing, connect the EN pin to a logic high (e.g., VCC) to enable the device. The input voltage (VIN) should be within the recommended range (2.5V to 5.5V). Additionally, ensure the output capacitor (COUT) is properly sized (e.g., 10uF) to filter the output voltage.
The RABF28-13 can deliver up to 1.5A of output current. However, it's essential to consider the thermal limitations and ensure proper heat sinking to prevent overheating, especially in high-current applications.
The RABF28-13 has built-in undervoltage lockout (UVLO) and overvoltage protection (OVP) features. During input voltage transients or brownouts, the device will automatically shut down to protect itself and the load. Once the input voltage returns to a safe operating range, the device will restart.
The RABF28-13 is rated for operation up to 125°C (TJ). However, it's essential to consider the derating of the output current and power dissipation at higher temperatures to ensure reliable operation. Consult the datasheet for detailed thermal characteristics.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RABF28-13 Overview
Use the download button to access the RABF28-13 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RABF2,
or try a keyword search, such as Bridge Rectifier Diodes
