The recommended operating voltage range for the RB421DT146 is 2.5V to 5.5V, as specified in the datasheet. However, it's recommended to operate within 2.7V to 5.0V for optimal performance and reliability.
To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a value between 1uF to 10uF, and an ESR (Equivalent Series Resistance) of less than 1 ohm. Additionally, the input capacitor should be placed as close to the VIN pin as possible.
The maximum output current capability of the RB421DT146 is 1.5A, but it's recommended to operate within 1.2A for optimal performance and reliability. Exceeding the maximum output current may lead to overheating and reduced lifespan.
To handle thermal considerations, ensure good airflow around the device, and use a heat sink or thermal pad if necessary. The maximum junction temperature (Tj) is 125°C, and the device should be operated within a temperature range of -40°C to 85°C for optimal performance and reliability.
The EN (Enable) pin is used to enable or disable the output voltage. When the EN pin is pulled high (logic level 1), the output voltage is enabled, and when it's pulled low (logic level 0), the output voltage is disabled. This pin can be used to implement power-saving modes or to control the output voltage in specific applications.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RB421DT146 Overview
Use the download button to access the RB421DT146 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RB421,
or try a keyword search, such as Rectifier Diodes
