ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended derating curves for the device. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends using a thermistor or thermocouple to monitor the temperature and adjust the operating conditions accordingly.
Although the datasheet specifies the recommended operating voltage range, it's essential to note that the input pins have a maximum allowed voltage of 6V, which should not be exceeded to prevent damage to the device.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input lines to protect the device from electrostatic discharge. Additionally, follow proper handling and storage procedures to prevent ESD damage.
ROHM recommends storing the devices in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -40°C to 125°C, and the humidity should be below 60%. Avoid storing the devices in environments with high levels of pollution or corrosive gases.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RBR2MM40ATR Overview
Use the download button to access the RBR2MM40ATR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RBR2M,
or try a keyword search, such as Rectifier Diodes
