Description:The RC19013 is a 13-output PCIe Gen6 buffer that is backward compatible to earlier PCIe generations. The RC19013 provides ultra-low additive jitter and reduced in-to-out delay performance for better design-margin and incorporates several features for easier and more robust design.
The recommended operating temperature range for the RC19013AGNG#KB0 is -40°C to 125°C, as specified in the datasheet. However, it's essential to note that the device's performance and reliability may degrade if operated outside this range.
To ensure proper power and decoupling, follow the recommended power supply and decoupling capacitor values specified in the datasheet. Additionally, use a low-ESR capacitor (e.g., 0.1 μF) close to the VCC pin and a bulk capacitor (e.g., 10 μF) near the power supply source.
The maximum clock frequency supported by the RC19013AGNG#KB0 is 100 MHz, as specified in the datasheet. However, the actual clock frequency may be limited by the system design, PCB layout, and signal integrity considerations.
To configure the RC19013AGNG#KB0 for low-power operation, refer to the datasheet's power management section. Enable the power-saving modes (e.g., sleep, idle) and adjust the clock frequency, voltage, and other parameters according to your system's requirements.
When designing a PCB with the RC19013AGNG#KB0, ensure proper signal routing, decoupling, and power supply design. Follow the recommended PCB layout guidelines in the datasheet and application notes, and consider using a 4-layer or 6-layer PCB to minimize noise and signal integrity issues.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RC19013AGNG#KB0 Overview
Use the download button to access the RC19013AGNG#KB0 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RC190,
or try a keyword search, such as Clock Drivers
