A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the RF signal traces as short as possible and use a 50-ohm impedance-controlled line to minimize signal loss.
The RF01VM2STE-17 requires a bias voltage of 2.7-5.5V. Ensure the bias voltage is stable and noise-free. A decoupling capacitor (e.g., 100nF) should be placed close to the VCC pin to filter out noise.
The RF01VM2STE-17 can handle up to 20 dBm (100 mW) of input power. Exceeding this limit may cause damage to the device.
The RF01VM2STE-17 has an input impedance of 50 ohms. Use a pi-network or a T-network impedance matching circuit to match the impedance of your system to the device.
The RF01VM2STE-17 operates from -40°C to 85°C. Operating outside this range may affect the device's performance and reliability.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RF01VM2STE-17 Overview
Use the download button to access the RF01VM2STE-17 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RF01V,
or try a keyword search, such as Rectifier Diodes
