ROHM recommends following a 4-layer PCB stack-up with a solid ground plane, and using a microstrip line design for the RF signal path. Additionally, keeping the RF signal path as short as possible and using a common mode choke for the power supply lines can help minimize noise and improve performance.
The RF071LAM4STFTR requires a bias voltage of 2.7V to 5.5V. Ensure that the bias voltage is stable and noise-free, and that the bias current is limited to 10mA or less. Additionally, use a high-impedance bias resistor (e.g., 1kΩ) to minimize the impact of bias voltage noise on the amplifier's performance.
The RF071LAM4STFTR is rated for operation from -40°C to +85°C. However, it's recommended to derate the device's performance at higher temperatures to ensure reliable operation. Consult the datasheet for specific derating guidelines.
The RF071LAM4STFTR has an ESD rating of 2kV human body model (HBM) and 100V machine model (MM). To ensure ESD protection, use ESD-safe handling and storage procedures, and consider adding external ESD protection devices (e.g., TVS diodes) to the PCB design.
Store the RF071LAM4STFTR in a dry, cool place, away from direct sunlight and moisture. Handle the device by the body, not the leads, and use an anti-static wrist strap or mat to prevent ESD damage. Avoid bending or flexing the leads, and use a vacuum pick-up tool or tweezers to handle the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RF071LAM4STFTR Overview
Use the download button to access the RF071LAM4STFTR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RF071,
or try a keyword search, such as Rectifier Diodes
